Honda Accord 2008 Manual page 1562

07/11/02 09:37:23 61TA0000_190_0141
VSA Modulator-Control Unit Removal and Installation
NOTE:
• Do not spill brake fluid on the vehicle; it may damage
the paint; if brake fluid gets on the paint, wash it off
immediately with water.
• Be careful not to damage or deform the brake lines
during removal and installation.
• To prevent the brake fluid from dripping, plug and
cover the hose ends and joints with a shop towel.
Removal
1. Turn the ignition switch to LOCK (0).
2. Remove the suction line mount bolt (A) from the
bracket.
ＴＡ０８Ａ００Ｄ５２１０００６３６３５ＫＤＡＴ００
＊０１
A
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
(cont'd)
19-141