Transmission End Cover; End Cover Removal - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:22:07 61TA0000_140_0321

Transmission End Cover

Special Tools Required

Mainshaft holder 07GAB-PF50101 or 07GAB-PF50100

1. Remove the three bolts (D) securing the ATF cooler inlet line brackets, the ATF filter bracket bolts (E), the ATF

cooler line bolts (F), and remove the ATF cooler line/ATF filter (G) and the filter brackets (H).

2. Remove the ATF cooler outlet line (I).

3. Remove A/T clutch pressure control solenoid valve A, the ATF joint pipes, the O-rings, the ATF pipe, and the

4. Remove A/T clutch pressure control solenoid valves B and C with the harness brackets, the ATF joint pipes, the

O-rings, and the gasket.

5. Remove the transmission range switch cover (J).

6. Remove the transmission range switch harness clamps (K) from the clamp bracket (L), then remove the

transmission range switch (M).

7. Remove the end cover (N), the dowel pins, the O-rings, and the end cover gasket.

ＴＡ０８ＡＥＢＥ１０４１０４２４２５１ＫＡＡＴ００

Table of Contents