07/11/02 09:20:43 61TA0000_140_0310
A/T Interlock System
Shift Lock Solenoid Test
1. Connect the HDS to the DLC (A) located under the
driver's side of the dashboard.
*01
2. Turn the ignition switch to ON (II). Make sure the
HDS communicates with the PCM. If it does not, go
to the DLC circuit troubleshooting (see page
11-208).
3. Select Shift Lock Solenoid Test in the
Miscellaneous Test Menu, and check that the shift
lock solenoid operates with the HDS.
4. Check that the shift lever can be moved out of P
when the Shift Lock Solenoid is ON. Move the shift
lever back in P, and check that it locks with the Shift
Lock Solenoid OFF.
5. Check that the shift lock releases when the shift
lock release is pushed, and check that it locks when
the shift lock release is released.
6. If the shift lock solenoid does not work properly, go
to the shift lock system troubleshooting (see page
14-300).
14-308
TA08AA1E10436455101FEAT00
A