07/11/02 09:37:05 61TA0000_200_0185
6. Remove the rear bolts.
*11
Fastener Locations
: Bolt, 2
7. Slide the front seat all the way back, and remove
the front bolts.
*12
Fastener Locations
: Bolt, 2
8. Do the battery terminal disconnection procedure
(see page 22-89), then wait at least 3 minutes
before removing the seat.
10 x 1.25 mm
10 x 1.25 mm
9. Lift up the front seat, then detach the harness clips
(A), and disconnect the seat wire harness connector
(B), the side airbag connector (C), and the seat belt
buckle switch connector (D). Driver's manual height
adjustable seat: Disconnect the seat position
sensor connector (E).
2-door driver's seat (10-way power seat)
C
B
D
A
4-door driver's seat (10-way power seat)
C
B
D
A
A
A
A
A
(cont'd)
20-183
*13
*14