Honda Accord 2008 Manual page 893

07/11/02 08:46:46 61TA0000_140_0050
Automatic Transmission
System Description (cont'd)
Electronic Control System (cont'd)
PCM A/T Control System Inputs and Outputs (cont'd)
＊１１
A □
PCM CONNECTOR C
Terminal
Number
C10
C11
C13
C14
C44
C48
14-48
(49P)
○ (49P)
Wire Color Terminal Name
BLK/RED IG1 (IGNITION SIGNAL)
GRN/RED MAP (MANIFOLD
ABSOLUTE PRESSURE
(MAP) SENSOR)
YEL/RED VCC1 (SENSOR VOLTAGE)
GRN/WHT SG1 (SENSOR GROUND)
BRN/YEL LG1 (LOGIC GROUND)
BRN/YEL LG2 (LOGIC GROUND)
PCM Connector Terminal Locations
B △ (49P)
Terminal side of female terminals
Description
Detects ignition switch With ignition switch ON (II): Battery voltage
signal With ignition switch LOCK (0): About 0 V
Detects MAP sensor signal With ignition switch ON (II): About 3.0 V
With engine at idle: About 1.0 V
Provides sensor voltage With ignition switch ON (II): About 5.0 V
With ignition switch LOCK (0): About 0 V
Sensor ground Less than 0.5 V at all times
Ground circuit for PCM Less than 0.5 V at all times
Ground circuit for PCM Less than 0.5 V at all times
C ○ (49P)
Signal