Honda Accord 2008 Manual page 1745

07/11/02 09:36:15 61TA0000_200_0178
Dashboard
Dashboard/Steering Hanger Beam Disassembly/Reassembly (cont'd)
9. Remove the bolts (A) from the front of the
dashboard, and remove the screws (B) from the
back of the dashboard, then separate the
dashboard (C) from the steering hanger beam (D).
＊０６
Fastener Locations
A
C
10. Assemble the dashboard and the steering hanger
beam in the reverse order of removal, and note
these items:
• Make sure the dashboard wire harness is not
pinched.
• Make sure the glove box light bulb socket is
connected properly.
• Push the harness clips and the harness holder
into place securely.
20-176
: Bolt, 10 B : Screw, 3
C
A
A
A
A
A
B
B
B
D
A
A
A
A
A
5 x 0.8 mm
5 N·m
(0.5 kgf·m,
4 lbf·ft)