Honda Accord 2008 Manual page 1140

07/11/02 09:20:04 61TA0000_140_0297
15. Make sure that the release spring end (A) is
installed in the shift lock release (B), and the
hooked end (C) is on the catch (D).
＊０５
C
16. Install the A/T gear position indicator panel base
(A).
＊０８
D
C
A
B
A
D
E
B
17. Install the A/T gear position indicator panel light
socket (B) in the indicator panel base.
18. Route the park pin switch/A/T gear position
indicator panel light harnesses. Take the slack out
of the harnesses, and secure the harnesses with the
band at the guide.
B
19. Install the A/T gear position indicator panel (C).
20. Install the shift lever knob (D) over the shift lever.
21. Apply non-hardening thread lock sealant to the
shift lever knob screws (E) before reinstall, then
install the shift lever knob cover (F) on the shift
lever knob.
22. Install the shift lever (see page 14-275).
23. Install these items:
• Center console (see page 20-147)
• Center console rear trim (see page 20-148)
• Center console panel (see page 20-145)
F
(cont'd)
14-295