Honda Accord 2008 Manual page 1716

07/11/02 09:34:13 61TA0000_200_0149
Center Console Removal/Installation
NOTE:
• Put on gloves to protect your hands.
• Take care not to scratch the front seat, the dashboard,
and related parts.
1. Remove these items:
• Center console panel (see page 20-145)
• Center console rear trim (see page 20-148)
2. If equipped, detach the harness clips (A) fastening
the front seat heater switch harnesses (B) from the
center console. M/T model with seat heater: Detach
the harness clip from the driver's side only.
＊０１
B
A
3. Disconnect the rear accessory power socket
connector (A) and the auxiliary jack assembly
connector (B), and detach the harness clip (C).
＊０２
A
4. Remove the screws (A) and the bolts (B) securing
the center console (C).
Fastener Locations
A
B
A
5. Detach the clips by pulling the front bottom edges
of the center console (A) out from both sides, and
pull up the console to release the hooks (B), then
remove the console.
Fastener Locations
C
B
ＴＡ０８Ａ００Ｊ２６２１６５１６４０１ＫＤＡＴ００
: Screw, 2 B : Bolt, 4
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
A
A
B
B
C
: Clip, 2
B
B
B
B
＊０３
B
B
＊０４
A
(cont'd)
20-147