Shift Lock Stop, Shift Lock Stop Cushion Replacement - Honda Accord 2008 Manual

07/11/02 09:20:45 61TA0000_140_0313

Shift Lock Stop, Shift Lock Stop Cushion Replacement

Type A Shift Lever
1. Remove the shift lock solenoid (see page 14-309).
2. Remove the shift lock stop (A) and the stop cushion
as a set.
＊０１
3. Install a new shift lock stop.
4. Apply silicone grease to the pin (B) on the shift
lever bracket base, and install the shift lock stop
over the pin.
5. Install the shift lock solenoid (see page 14-309).
A
B
Type B Shift Lever
1. Remove the shift lever assembly (see page 14-273).
2. Release the lock tab retaining the shift lock
solenoid using a thin-bladed screwdriver.
3. Remove the shift lock stop (A) and the stop cushion
as a set.
A
B
4. Install a new shift lock stop.
5. Apply silicone grease to the pin (B) on the shift
lever bracket base, and install the shift lock stop
over the pin.
6. Install the shift lock solenoid by aligning the joint of
the shift lock solenoid plunger with the tip of the
shift lock stop, then push the shift lock solenoid into
the shift lever securely.
7. Install the shift lever assembly (see page 14-275).
ＴＡ０８ＡＡ１Ｅ１０４３６４５５１５１ＫＢＡＴ００
＊０２
14-311