Honda Accord 2008 Manual page 1678

07/11/02 09:32:28 61TA0000_200_0111
7. Install the trim in the reverse order of removal, and
note these items:
• If the clip (A) is damaged or stress-whitened,
replace it with a new one.
• If the side curtain airbag has deployed, replace
the B-pillar upper trim, the B-pillar lower trim,
and the clip on the trim with new ones (see page
24-203).
• To prevent the side curtain airbags from
deploying improperly and possibly causing
injury, inspect the trim and replace it if it has any
of these types of damage:
– Any cracks or deformations in the B-pillar
– Any cracks or deformations in the B-pillar
– Any cracks or stress-whitened areas in the clip
• Replace any damaged parts with new ones.
• Make sure the top of the trim overlaps with the
headliner correctly (see page 24-205).
• Make sure the pin (G) on the front seat belt
shoulder anchor adjuster (H) and the hole (I) on
the back of the slider are engaged when
installing the B-pillar upper trim.
• Make sure the upper hooks are installed into the
holes in the body securely.
• Push the clip and the hooks into place securely.
• Before installing the anchor bolt, make sure there
are no twists or kinks in the seat belt.
Trim Inspection
＊１０
F
upper trim (B) and the upper hooks (C), and
any stress-whitened areas in the upper part of
the trim
lower trim (D), and any breakages in the part
(E) fitted with the B-pillar upper trim
seating surface (F)
A
D
Slider engagement with shoulder anchor adjuster
H
C
B
E
G
I
20-109
＊１１