Honda Accord 2008 Manual page 1798

07/11/02 09:38:23 61TA0000_200_0231
Trunk Pass-through Lid
Replacement
4-door
NOTE: Take care not to tear the seams or damage the
seat covers.
1. Fold the rear seat-back forward.
2. Remove the screws, and detach the hooks (A), then
remove the trunk pass-through lid (B).
＊０１
Fastener Locations
: Screw, 2
A
3. Install the trunk pass-through lid in the reverse
order of removal.
ＴＡ０８ＡＢ４Ｊ４６１６６４６０４６０ＫＢＡＴ００
Rear Seat Armrest Beverage Holder
Replacement
Special Tools Required
KTC trim tool set SOJATP2014
Available through the American Honda Tool and
Equipment Program; call 888-424-6857
4-door
NOTE:
• Take care not to tear the seams or damage the seat
covers.
• Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
B
1. Using the appropriate trim tool, push on the rear
hooks (A) to pull up the beverage holder (B), then
release the hooks from the wire (C).
ＴＡ０８ＡＢ４Ｊ４６１６６４１４５５０ＫＢＡＴ００
B
C
A
20-229 20-229
＊０１
(cont'd)