Honda Accord 2008 Manual page 1701

07/11/02 09:33:21 61TA0000_200_0134
Interior Trim
Headliner Removal/Installation (cont'd)
10. From under the driver's dash, remove the bolt, and
detach the hook (A), then move the driver's under-
dash fuse/relay box (B).
＊０５
Fastener Location
: Bolt, 1
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
11. From under the driver's dash, disconnect the roof
wire harness connector(s) (A), and detach the
harness clip (B) and the harness holder (C).
＊０６
B
20-132
B
A
A
12. From under the passenger's dash, disconnect and
detach the antenna lead connector (A), and detach
the harness clip (B).
13. 2-door: From the right C-pillar area, disconnect the
antenna lead connector (A) from the antenna
module unit (B), and detach the harness clip (C).
Pass the harness clip and the connector through
the gap between the projection (D) of the side
curtain airbag bracket and the glass antenna
connector (E) by pulling the antenna lead (F) to the
headliner side.
F
C
F
B
A
C
E
A
D
B
C
A
＊０７
＊０８