Honda Accord 2008 Manual page 1210

07/11/02 09:23:29 61TA0000_140_0367
11. Release the clutch end-plate to lower the clutch
end-plate, then put the clutch compressor
attachment on the clutch end-plate (A).
＊０９
12. Press the clutch compressor attachment down with
147 N (15 kgf, 33 lbf) (B) using a force gauge, and
read the dial indicator (C).
B
C
147 N
(15 kgf,
07ZAE-PRP0100
33 lbf)
A
E
D
13. The dial indicator reads the clearance (D) between
the clutch end-plate and the top disc (E). Take
measurements in at least three places, and use the
average as the actual clearance.
Clearance between Clutch End-Plate and Top Disc
Service Limit:
1st Clutch: 1.38 1.58 mm (0.054 0.062 in.) −
−
2nd Clutch: 1.14 1.34 mm (0.045 0.053 in.)
−
3rd Clutch: 1.23 1.43 mm (0.048 0.056 in.)
4th Clutch: 0.93 1.13 mm (0.037 0.044 in.) −
5th Clutch: 0.93 1.13 mm (0.037 0.044 in.) −
−
−
−
−
−
(cont'd)
14-365