07/11/02 09:29:49 61TA0000_200_0052
Doors
Door Glass Adjustment
NOTE: Check the weatherstrip and the glass run
channel for damage or deterioration, and replace them
if necessary.
1. Place the vehicle on a firm, level surface.
2. Remove these items:
• Door panel:
– 2-door (see page 20-12)
– 4-door front door (see page 20-16)
– 4-door rear door (see page 20-35)
• Plastic cover:
– Front door (see step 2 on page 20-19)
– Rear door (see step 2 on page 20-38)
3. Carefully move the glass (A) until you can see the
glass mounting bolts (B), then loosen them.
2-door
*01
C
4-door front
*02
C
20-50
A
B
6 x 1.0 mm
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
A
B
6 x 1.0 mm
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
4-door rear
A
B
6 x 1.0 mm
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
4. Push the glass against the run channel (C), then
tighten the glass mounting bolts.
5. Check that the glass moves smoothly.
6. Raise the glass fully, and check for gaps. Also make
sure that the glass (A) contacts the glass run
channel (B) evenly.
7. Attach the plastic cover making sure it is sealed
around its outside perimeter to seal out water.
TA08A00J54400020371MBAT20
C
A
B
*03
*04