Shift Solenoid Valve Removal And Installation - Honda Accord 2008 Manual

07/11/02 09:22:18 61TA0000_140_0340
Valve Body

Shift Solenoid Valve Removal and Installation

NOTE:
• Do not hold the shift solenoid valve connector to
remove and to install the shift solenoid valves. Hold
the shift solenoid valve body.
• Do not install the shift solenoid valve A before
installing the shift solenoid valve D, and do not install
shift solenoid valve B before shift solenoid valve E. If
shift solenoid valves A and B are installed before shift
solenoid valves D and E, it may damage the hydraulic
control system.
1. Remove the shift solenoid valves by holding the
solenoid valve body.
2. Install new O-rings (F) on each shift solenoid valves.
NOTE: A new solenoid valve comes with new
O-rings. If you install a new solenoid valve, use the
O-rings provided with it.
＊０１
A
F
B
F
3. Install shift solenoid valve D by holding the shift
solenoid valve body; be sure that the mounting
bracket contacts the servo body.
4. Install shift solenoid valve A by holding the shift
solenoid valve body; be sure that the mounting
bracket contacts the bracket on shift solenoid
valve D.
14-338
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
D
6 x 1.0 mm
12 N·m
(1.2 kgf·m, 8.7 lbf·ft)
F
6 x 1.0 mm
12 N·m
(1.2 kgf·m,
E
8.7 lbf·ft)
C
F
5. Install shift solenoid valve E by holding the shift
solenoid valve body; be sure that the mounting
bracket contacts the servo body.
6. Install shift solenoid valve B by holding the shift
solenoid valve body; be sure that the mounting
bracket contacts the bracket on shift solenoid
valve E.
7. Install shift solenoid valve C by holding the shift
solenoid valve body; be sure that the mounting
bracket contacts the servo body.
ＴＡ０８ＡＥＢＥ１０４１０６５４８０１ＫＤＡＴ００