Dtc Troubleshooting - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:
Table of Contents

Advertisement

07/11/02 09:17:54 61TA0000_110_0346
Fuel Supply System

DTC Troubleshooting

DTC P0461:
Fuel Level Sensor (Fuel Gauge
Sending Unit) Circuit Range/Performance
Problem
NOTE:
• Before you troubleshoot, record all freeze data and
any on-board snapshot, and review the general
troubleshooting information (see page 11-3).
• Because it requires 162 miles (260 km) of driving
without refueling to complete this diagnosis, DTC
P0461 cannot be duplicated during this
troubleshooting.
1. Test the fuel gauge sending unit (see page 11-381).
Is the f uel gauge sending unit OK ?
YES
Check for poor connections or loose
terminals at the fuel gauge sending unit and the
gauge control module.
NO
Replace the fuel gauge sending unit (see page
11-377), then go to step 2.
2. Turn the ignition switch to ON (II).
3. Reset the ECM/PCM with the HDS.
4. Do the ECM/PCM idle learn procedure (see page
11-343).
5. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P0461 indicated?
YES
Check for poor connections or loose
terminals at the fuel gauge sending unit and the
gauge control module, then go to step 1.
NO
Troubleshooting is complete. If any other
Temporary DTCs or DTCs are indicated, go to the
indicated DTC's troubleshooting.
11-346
TA08AEAK72100090461FAAT00

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents