07/11/02 09:20:43 61TA0000_170_0067
Power Steering
Gearbox Mount Cushion Replacement
1. Remove the steering gearbox (see page 17-36).
2. Position a 40 mm socket wrench (A) on the flange
part of the gearbox housing with a washer (B), a
10 x 150 mm flange bolt (C) and a 10 mm nut (D) as
shown.
*01
3. Hold the flange bolt with a wrench, and tighten the
nut with a wrench. Remove the gearbox mount
cushion (E).
4. Apply a mild soap and water solution to the new
gearbox mount cushion surface (A), then place it on
the gearbox mounting cushion hole.
*02
B
A
B
5. Position the 40 mm socket wrench on the flange
part of the gearbox housing with a washer, a flange
bolt, and a nut as shown.
6. Install the gearbox mount cushion by tightening the
nut until the mount cushion edges (B) contact the
gearbox flange surface.
7. Install the steering gearbox (see page 17-58).
17-66
TA08A00F00000057118KBAT00
C
B
E
A
D