Honda Accord 2008 Manual page 923

07/11/02 08:47:19 61TA0000_140_0080
Automatic Transmission
DTC Troubleshooting (cont'd)
10. Turn the ignition switch to LOCK (0).
11. Jump the SCS line with the HDS.
12. Disconnect PCM connector B (49P).
13. Check for continuity between PCM connector
terminal B14 and body ground.
＊０２
Is there continuity?
YES
between PCM connector terminal B14 and the
transmission range switch, then go to step 50.
NO −
14-78
PCM CONNECTOR B (49P)
ATP P (BLU/BLK)
Terminal side of female terminals
− Repair short to body ground in the wire
Go to step 14.
14. Check for continuity between transmission range
switch connector terminal No. 10 and body ground.
TRANSMISSION RANGE SWITCH CONNECTOR
Wire side of female terminals
Is there continuity?
YES − Go to step 57.
−
NO Repair open in the wire between transmission
range switch connector terminal No. 10 and ground
(G101) (see page 22-22), or repair poor ground
(G101), then go to step 50.
GND (BLK)
＊０３