Honda Accord 2008 Manual page 1697

07/11/02 09:33:18 61TA0000_200_0130
Interior Trim
Sunvisor Removal/Installation
(cont'd)
11. While holding the bracket cover (A), rotate the
sunvisor (B) forward until the hook (C) snaps into
place. Then make sure the sunvisor does not come
off the body by pulling it down. Set the sunvisor to
the holder (D).
＊０９
D
B
20-128 20-128
A
C
Grab Handle Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014
Available through the American Honda Tool and
Equipment Program; call 888-424-6857
NOTE: Use the appropriate tool from the KTC trim tool
set to avoid damage when removing components.
1. Lower the grab handle (A), then pull out the caps
(B) by prying up at the notches (C) with a small flat-
tip screwdriver.
A
A
A
B
2. While pinching the clips (A), release the hooks (B),
then remove the grab handle (C).
A
ＴＡ０８Ａ００Ｊ２６２０００３０１９０ＫＤＡＴ００
A
B
C
A
C
＊０１
C
B
＊０２