07/11/02 09:32:30 61TA0000_200_0115
9. If the new near pillar trim (A) will be installed,
before installing the trim, temporarily remove a
new rear clip (B).
*18
B
10. Check the overlap between the headliner and the
C-pillar trim, and if necessary, adjust it (see page
24-205).
11. Carefully reinstall a new rear clip (A) to the C-pillar
trim (B). Be sure that the grommet (C) is nearest to
the top of the pin (D) as shown.
*19
C
D
A
12. If the old C-pillar trim will be reinstalled, install the
new grommet (B) to the pin (C). Do not push the
grommet too hard. Be sure that the grommet is
nearest to the top of the pin as shown.
A
13. Reinstall the C-pillar lid clip (A) to the C-pillar lid (B).
B
B
A
B
A
B
A
(cont'd)
20-113
*26
C
*20