Honda Accord 2008 Manual page 1782

07/11/02 09:37:49 61TA0000_200_0215
16. Except driver's manual height adjustable seat:
Release the lower and inside hook strips (A). The
driver's seat is shown; the passenger's seat is
similar.
＊１５
17. Except driver's manual height adjustable seat:
Remove the lumbar support motor cover (A)
(driver's seat) or the ODS unit cover (B) (passenger's
seat).
–1 Turn over the seat-back cover (C) and the pad
–2 Release the cover from the lower hooks (E).
–3 Pull the cover upward to release it from the
Driver's seat
＊２８
(D) as needed.
upper hook (F).
C
D
F
E
G
Passenger's seat
D
A
B
18. Except driver's manual height adjustable seat:
Disconnect the seat wire harness connector (G).
19. Except driver's manual height adjustable seat:
Detach the harness clip (A), then pull the seat wire
harness (B) in through a hole in the seat frame, and
pull it out through the harness hole (C) in the seat-
back cover (D). The passenger's seat is shown; the
driver's seat is similar.
B
A
C
F
E
G
A
C
D
(cont'd)
20-213
＊１６
＊１７