07/11/02 08:47:43 61TA0000_140_0082
Automatic Transmission
DTC Troubleshooting (cont'd)
20. Measure the voltage between transmission range
switch connector terminals No. 2 and No. 10.
*06
TRANSMISSION RANGE SWITCH CONNECTOR
ATP N (RED/BLK)
Is there more than 5 V ?
YES
−
NO
21. Turn the ignition switch to LOCK (0).
22. Jump the SCS line with the HDS.
23. Disconnect PCM connector B (49P).
14-80
GND (BLK)
Wire side of female terminals
−
Go to step 25.
Go to step 21.
24. Check for continuity between PCM connector
terminal B13 and body ground.
PCM CONNECTOR B (49P)
ATP N (RED/BLK)
Terminal side of female terminals
Is there continuity?
YES
−
Repair short to body ground in the wire
between PCM connector terminal B13 and the
transmission range switch, then go to step 50.
NO
−
Go to step 57.
*07