Honda Accord 2008 Manual page 1607

07/11/02 09:29:14 61TA0000_200_0040
Doors
Rear Door Outer Handle Replacement
4-door
NOTE: Put on gloves to protect your hands.
1. Remove the door panel (see page 20-35).
2. Disconnect the power door lock actuator connector
(A), and detach the harness clips (B).
＊０１
C
3. Remove the rear plug cap (C), then remove the
plastic cover (D) as needed.
NOTE: Remove the glue from the door surface. If
the plastic cover is damaged or torn, replace it.
4. Remove the hole seal (A).
＊０２
A
20-38
D
A
B
5. While holding the outer handle cover (A) from
outside of the door, remove the bolt, and then
release the hooks (B) of the outer handle cover,
then remove the cover.
Fastener Location Fastener Location
: Bolt, 1 : Bolt, 1
B
A
6. Release the hooks (A), then remove the outer
handle holder (B) from the outer handle base (C).
C
A
ＴＡ０８ＡＢ４Ｊ１６１６６２２１３０１ＫＢＡＴ００
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
B
B
＊０３
＊０４