Honda Accord 2008 Manual page 926

07/11/02 08:47:43 61TA0000_140_0083
25. Measure the voltage between transmission range
switch connector terminals No. 8 and No. 10.
＊０８
TRANSMISSION RANGE SWITCH CONNECTOR
Is there battery voltage?
YES
−
NO
26. Turn the ignition switch to LOCK (0).
27. Jump the SCS line with the HDS.
28. Disconnect PCM connector B (49P).
ATP D (PNK) GND (BLK)
Wire side of female terminals
− Go to step 30.
Go to step 26.
29. Check for continuity between PCM connector
terminal B22 and body ground.
PCM CONNECTOR B (49P)
ATP D (YEL/GRN)
Terminal side of female terminals
Is there continuity?
YES − Repair short to body ground in the wire
between PCM connector terminal B22 and the
transmission range switch, then go to step 50.
NO − Go to step 57.
＊０９
(cont'd)
14-81