Honda Accord 2008 Manual page 1523

07/11/02 09:36:23 61TA0000_190_0102
VSA System Components
DTC Troubleshooting (cont'd)
10. Turn the ignition switch to LOCK (0).
11. Reconnect all connectors.
12. Update the VSA modulator-control unit if it does
not have the latest software (see page 19-140). If
the unit already has the latest software, substitute a
known-good VSA modulator-control unit (see page
19-141).
13. Turn the ignition switch to LOCK (0), then turn it to
ON (II) again.
14. Check for DTCs with the HDS.
Is DT C 64-12 indicated?
YES − Check for loose terminals in the VSA
modulator-control unit 36P connector. If the VSA
modulator-control unit was updated, substitute a
known-good VSA modulator-control unit (see page
19-141), then retest. If the VSA modulator-control
unit was substituted, go to step 1.
NO − If the VSA modulator-control unit was
updated, troubleshooting is complete. If the VSA
modulator-control unit was substituted, replace the
original VSA modulator-control unit (see page
19-141). If any other DTCs are indicated, go to the
indicated DTCs troubleshooting.
19-102 19-102
DTC 65-21: Brake Fluid Level Stuck ON
NOTE: Bleeding the brake system while the ignition
switch is ON can cause this DTC.
1. Check the brake fluid level in the master cylinder
reservoir.
Is the brake f luid level OK ?
YES − Go to step 2.
NO − Do the brake pad inspection: Front (see page
19-12), rear (see page 19-30), check for brake fluid
leaks or replace worn pads. Fill the fluid reservoir
to the correct level or replace the pads, then go to
step 2 and recheck.
2. Turn the ignition switch to ON (II).
3. Clear the DTC with the HDS.
4. Turn the ignition switch to LOCK (0), then turn it to
ON (II) again.
5. Check for DTCs with the HDS.
Is DT C 65-21 indicated?
YES − Go to step 6.
NO − Intermittent failure, the system is OK at this
time.
6. Release the parking brake.
7. Turn the ignition switch to LOCK (0), then turn it to
ON (II) again.
8. Check the brake system indicator in the gauge
control module.
Does the indicator come on then go of f ?
−
YES Go to step 13.
NO − Go to step 9.
ＴＡ０８ＡＥ４Ｋ８０１０００Ｒ６５２１ＦＡＡＴ０１