Atf Feed Pipe Replacement - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:22:10 61TA0000_140_0325

ATF Feed Pipe Replacement

1. Remove the snap rings (A), the ATF feed pipes (B),

and the feed pipe flanges (C) from the end cover (D).

NOTE: Replace the end cover, if the 1st clutch ATF

feed pipe (E) replacement is required.

2. Install new O-rings (F) over the ATF feed pipes.

3. Install the ATF feed pipes in the end cover by

aligning the feed pipe tabs with the indentations in

the end cover.

4. Install new O-rings (G) in the end cover, then install

the feed pipe flanges over the ATF feed pipes.

5. Secure the ATF feed pipes and the feed pipe

flanges with the snap rings.

ＴＡ０８ＡＥＢＥ１０４１０４１３０１３ＫＢＡＴ００

Table of Contents