Honda Accord 2008 Manual page 1723

07/11/02 09:34:17 61TA0000_200_0156
Dashboard
Center Pocket Removal/Installation
Without Navigation System
NOTE: Take care not to scratch the dashboard and its
related parts.
1. Remove the center console panel (see page 20-145).
2. A/T model: Move the shift lever to 1st.
M/T model: Move the shift lever to R.
3. Apply protective tape (A) to the entire pocket lid
face and the front portion of the A/T gear position
indicator panel (B) (A/T model).
＊０１
A
20-154
4. Open the lid, and remove the bolts securing the
center pocket (A).
Fastener Locations
: Bolt, 4
5. Pull the center pocket (A) out, then remove it. Take
care not to scratch the shift lever knob and the A/T
gear position indicator panel (A/T model).
B
A
6. Install the pocket in the reverse order of removal.
ＴＡ０８ＡＮ０Ｊ２６２２０２１９２８５ＫＤＡＴ００
5 x 0.8 mm
5 N·m
(0.5 kgf·m, 4 lbf·ft)
A
＊０２
＊０３