07/11/02 09:31:11 61TA0000_200_0088
Moonroof
Drain Channel Replacement
1. Remove the moonroof glass (see page 20-83).
2. With the moonroof switch, move both glass
brackets (A) to the position where the moonroof
normally tilts up and disconnect the drain channel
rods (B) on both sides.
*01
B
3. Slide the drain channel (A) forward.
*02
20-86
4. Pull the rear edge of the drain channel (A) up while
pushing both clips (B), and release the channel
from both hooks (C) of the drain channel slider by
pulling it rearward.
A
A
5. Remove the drain channel.
6. Install the channel in the reverse order of removal,
and note these items:
• Push the clip portions into place securely.
• Check the glass position adjustment (see page
7. Check for water leaks. Let the water run freely from
a hose without a nozzle. Do not use a high-pressure
spray.
TA08AB9J34200040701KBAT00
B
A
20-83).
A
C
*03