Park Pin Switch Test - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:20:45 61TA0000_140_0315

Park Pin Switch Test

1. Remove these items:

• Center console panel (see page 20-145)

• Center console rear trim (see page 20-148)

• Center console (see page 20-147)

2. Disconnect the park pin switch/A/T gear position

indicator panel light connector.

3. Shift into P, and check for continuity between park

pin switch/A/T gear position indicator panel light

connector terminals No. 1 and No. 2.

There should be no continuity.

4. Shift out of P, and check for continuity between

connector terminals No. 1 and No. 2.

There should be continuity.

5. If the park pin switch tests OK, install the center

console (see page 20-147).

If the park pin switch fails the test, replace the park

pin switch (see page 14-314).

ＴＡ０８ＡＡ１Ｅ１０４３６４４５４０１ＦＥＡＴ００

Terminal side of male terminals

Table of Contents