Honda Accord 2008 Manual page 1410

07/11/02 09:29:31 61TA0000_180_0077
DTC 51, 53, 55, 57:
Registration Error
NOTE: Before you begin troubleshooting, determine the
actual location of the TPMS wheel sensor on the vehicle
using the tire pressure sensor location procedure
(see page 18-61).
1. Turn the ignition switch to ON (II).
2. Check for DTCs with the HDS.
3. Note the tire pressure sensor(s) number by the
indicated DTC.
DTC
51
53
55
57
4. Turn the ignition switch to LOCK (0).
5. Make sure all four wheels are TPMS wheels with
properly mounted tire pressure sensors. If
necessary substitute known-good TPMS wheels.
6. Turn the ignition switch to ON (II).
7. Clear the DTC with the HDS.
8. Memorize the tire pressure sensor IDs with the HDS
(see page 18-60).
9. Test-drive the vehicle. Drive the vehicle at 28 mph
(45 km/h) for 1 minute or more.
10. Check for DTCs with the HDS.
Is DT C 51, 53, 55, or 57 indicated?
YES − Check for loose terminals and poor
connections at the TPMS control unit. If necessary,
substitute a known-good TPMS control unit
(see page 18-85), and recheck.
NO − Replace the appropriate tire pressure sensor
(see page 18-86).
ＴＡ０８Ａ００Ｋ７９７０００８１５１０ＦＡＡＴ００
Tire Pressure Sensor
Tire Pressure Sensor
No. 1
No. 2
No. 3
No. 4
18-77