Honda Accord 2008 Manual page 1558

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:37:14 61TA0000_190_0137

Steering Angle Sensor Replacement

NOTE: Do not damage or drop the combination switch as the steering angle sensor is sensitive to shock and vibration.

1. Remove the steering wheel (see page 17-24).

2. Remove the steering column covers (see page 20-167) and the cable reel (see page 24-220).

3. Remove the combination switch assembly (see step 7 on page 17-29).

4. Remove the combination light switch (A) and the wiper/washer switch (B) from the combination switch body

assembly (C).

5. Install the combination switch body assembly in the reverse order of removal.

• Do not remove the steering angle sensor from the combination switch body.

• When installing the cable reel, set the turn signal canceling sleeve position (see page 24-221).

• Note that the tightening order is specified for combination switch mounting screws (see page 17-30).

ＴＡ０８Ａ００Ｄ５２１０００５７０９１ＫＢＡＴ００

Chapters

Table of Contents