Honda Accord 2008 Manual page 1743

07/11/02 09:36:14 61TA0000_200_0176
Dashboard
Dashboard/Steering Hanger Beam Disassembly/Reassembly
Special Tools Required
KTC trim tool set SOJATP2014
Available through the American Honda Tool and
Equipment Program; call 888-424-6857
NOTE:
• Put on gloves to protect your hands.
• Take care not to scratch the dashboard, the body and
the other related parts.
• Take care not to bend the brackets.
• Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
1. Remove the dashboard/steering hanger beam
(see page 20-168).
2. Remove these items from the dashboard:
• Instrument visor (see page 20-151)
• Center pocket:
– Without navigation system (see page 20-154)
– With navigation system (see page 20-155)
• Driver's outer dashboard trim (see page 20-153)
• Driver's inner dashboard trim (see page 20-153)
• Driver's dashboard side lid (see step 2 on page
20-162)
• Driver's dashboard side vent (see page 20-162)
• Driver's side defogger vent trim (see page
20-164)
• Passenger's dashboard trim (see page 20-159)
• Passenger's dashboard side lid (see step 6 on
page 20-161)
• Passenger's dashboard side vent (see page
20-162)
• Gauge control module (see page 22-332)
• Sunlight sensor, with climate control (see page
21-160)
• In-car temperature sensor, with climate control
(see page 21-158)
• Audio disk changer, with navigation system
(see page 23-113)
• Passenger's airbag (see page 24-207)
20-174
3. With navigation system: Remove the bolts, then
remove the center pocket frame (A) from the
dashboard.
Fastener Locations
: Bolt, 2
5 x 0.8 mm
5 N·m
(0.5 kgf·m, 4 lbf·ft)
A
4. Remove these items from the dashboard:
• Center display visor:
– Without navigation system (see page 20-157)
– With navigation system (see page 20-158)
• Audio-HVAC module:
– Without navigation system (see page 23-111)
– With navigation system (see page 23-109)
• Audio-HVAC display:
– Without navigation system (see page 23-114)
– With navigation system (see page 23-114)
Driver's side
5. Detach the harness clip (A) from the dashboard.
ＴＡ０８Ａ００Ｊ２６２２０２０００００ＭＦＡＴ００
A
＊０７
＊０１