Ii-1-2-14 Details Page For Ipv6 - 6In4 Static Tunnel In Wan1 / Wan2 - Draytek Vigor2762 series User Manual

II-1-2-14 Details Page for IPv6
II-1-2-14 Details Page for IPv6
This type allows you to setup 6in4 Static Tunnel for WAN interface.
Such mode allows the router to access IPv6 network through IPv4 network.
However, 6in4 offers a prefix outside of 2002::0/16. So, you can use a fixed endpoint rather
than anycast endpoint. The mode has more reliability.
Available settings are explained as follows:
Item
Remote Endpoint IPv4
Address
6in4 IPv6 Address
LAN Routed Prefix
Tunnel TTL
WAN Connection
Detection
Vigor2762 Series User's Guide
– 6in4 Static Tunnel in WAN1 / WAN2
– 6in4 Static Tunnel in WAN1 / WAN2
Description
Type the static IPv4 address for the remote server.
Type the static IPv6 address for IPv4 tunnel with the value
for prefix length.
Type the static IPv6 address for LAN routing with the value
for prefix length.
Type the number for the data lifetime in tunnel.
Such function allows you to verify whether network
connection is alive or not through Ping Detect.
Mode – Choose Always On or Ping Detect for the system to
execute for WAN detection. Always On means no detection
will be executed. The network connection will be on
always.

Ping IP/Hostname – If you choose Ping Detect as
detection mode, you have to type IP address in this field
for pinging.

TTL (Time to Live) –If you choose Ping Detect as
85