I-5-8-2 Virtual Wan - Draytek Vigor2762 series User Manual

Adsl2/2+ and vdsl2 router
Hide thumbs Also See for Vigor2762 series:
Table of Contents

Advertisement

Item
Detailed explanation (for IPv6) is shown below:
Item
LAN Status
WAN IPv6 Status
Info

I-5-8-2 Virtual WAN

I-5-8-2 Virtual WAN
Such page displays the virtual WAN connection information.
Virtual WAN are used by TR-069 management, VoIP service and so on.
The field of Application will list i-9the purpose of such WAN connection.
26
Description
RX Rate - Displays the speed of received octets at the
WAN interface.
Description
IP Address- Displays the IPv6 address of the LAN interface..
TX Packets-Displays the total transmitted packets at the
LAN interface.
RX Packets-Displays the total received packets at the LAN
interface.
TX Bytes - Displays the speed of transmitted octets at the
LAN interface.
RX Bytes - Displays the speed of received octets at the LAN
interface.
Enable – No in red means such interface is available but not
enabled. Yes in green means such interface is enabled. No
in red means such interface is not available.
Mode - Displays the type of WAN connection (e.g., TSPC).
Up Time - Displays the total uptime of the interface.
IP - Displays the IP address of the WAN interface.
Gateway IP - Displays the IP address of the default
gateway.
The words in green mean that the WAN connection of that interface is ready for
accessing Internet; the words in red mean that the WAN connection of that
interface is not ready for accessing Internet.
Vigor2762 Series User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents