Draytek Vigor2762 series User Manual page 510

Example Example
> ip6 route -s FE80::250:7FFF:FE12:500 16 FE80::250:7FFF:FE12:100 LAN
%
> ip6 route -a LAN
PREFIX/PREFIX-LEN
FLAGS
-------------------------------------------------------------------------
------
FE80::/128
U
FE80::250:7FFF:FE00:0/128
FE80::/64
U
FE80::/16
UGA
FF02::1/128
UC
FF00::/8
U
::/0
UNREACHABLE !
Telnet Command:
Telnet Command:
This command allows you to pin an IPv6 address or a host.
Syntax
Syntax
ip6 ping [IPV6 address/Host] [LAN1|LAN2|...|LAN4|WAN1|WAN2|USB1|USB2][send count]
[data_size(1~1452)]
Syntax Description
Syntax Description
Parameter
IPV6 address/Host
LAN1|LAN2|...|LAN4|
WAN1|WAN2|USB1|USB2
Example
Example
> ip6 ping 2001:4860:4860::8888 WAN2
Pinging 2001:4860:4860::8888 with 64 bytes of Data:
Receive reply from 2001:4860:4860::8888, time=330ms
500
Route FE80::250:7FFF:FE12:500/16 successfully added!
_EXPIRES_
ip6 ping
ip6 ping
Description
It means to specify the IPv6 address or host for ping.
It means to specify LAN or WAN interface for such address.
_NEXT-HOP_ I/F
0 ::
LAN
0 ::
0
0 FE80::250:7FFF:FE12:100
0 FF02::1
0
0
METRIC STATE
LAN 0 UNICAST
0 UNICAST
LAN 256 UNICAST
LAN 1024 UNICAST
LAN 0 UNICAST
LAN 256 UNICAST
LAN -1
Vigor2762 Series User's Guide
U