Draytek Vigor2762 series User Manual page 575

Telnet Command:
Telnet Command:
This command can set the time to check if the IP address can be assigned again by DHCP
server or not.
srv dhcp expRecycleIP <sec time>
Syntax Description
Syntax Description
Parameter
sec time
Example
Example
Vigor> srv dhcp expRecycleIP 250
% DHCP expired_RecycleIP = 250
Telnet Command:
Telnet Command:
This command can set the TFTP server as the DHCP server.
srv dhcp tftp <TFTP server name>
Syntax Description
Syntax Description
Parameter
TFTP server name
Example
Example
> srv dhcp tftp TF123
> srv dhcp tftp ?
%% srv dhcp tftp <TFTP server name>
% Now: TF123
Telnet Command:
Telnet Command:
This command can set the custom option for the DHCP server.
srv dhcp option -h
srv dhcp option -l
srv dhcp option -d [idx]
srv dhcp option -e [1 or 0] -c [option number] -v [option value]
srv dhcp option -e [1 or 0] -c [option number] -a [option value]
srv dhcp option -e [1 or 0] -c [option number] -x [option value]
srv dhcp option -u [idx unmber]
Syntax Description Syntax Description
Parameter
-h
-l
-d[idx]
-e [1 or 0]
Vigor2762 Series User's Guide
srv dhcp expired_RecycleIP
srv dhcp expired_RecycleIP
Description
It means to set the time (5~300 seconds) for checking if the IP can
be assigned again or not.
srv dhcp tftp
srv dhcp tftp
Description
It means to type the name of TFTP server.
srv dhcp option
srv dhcp option
Description
It means to display usage of this command.
It means to display all the user defined DHCP options.
It means to delete the option number by specifying its index number.
It means to enable/disable custom option feature.
565