Draytek Vigor2762 series User Manual page 631

on/off
Example
Example
> wan DF_check on
%DF bit check enable!
Telnet Command:
Telnet Command:
This command allows you to disable WAN connection.
Example
Example
> wan disable WAN
%WAN disabled.
Telnet Command:
Telnet Command:
This command allows you to disable wan connection.
Example
Example
> wan enable WAN
%WAN1 enabled.
Telnet Command:
Telnet Command:
This command allows you to enable or disable the function of WAN forwarding. The packets
are allowed to be transmitted between different WANs.
wan forward [on]
wan forward [off]
Syntax Description
Syntax Description
Parameter
on/off
Example
Example
> wan forward ?
%WAN forwarding is Disable!
> wan forward on
%WAN forwarding is enable!
Telnet Command:
Telnet Command:
This command allows you to display the status of WAN connection, including connection
mode, TX/RX packets, DNS settings and IP address.
Example
Example
> wan status
WAN1: Offline, stall=N
Mode: ---, Up Time=00:00:00
IP=---, GW IP=---
Vigor2762 Series User's Guide
It means to enable or disable DF.
wan disable
wan disable
wan enable
wan enable
wan forward
wan forward
Description
It means to enable or disable WAN forward.
wan status
wan status
621