Draytek Vigor2762 series User Manual page 644

> wl wmm ap 0 3 4 6 0 0
QueIdx=0: APAifsn=3,APCwmin=4,APCwmax=6, APTxop=0,APACM=0
> wl wmm enable 1 0 1 0
WMM_SSID0 =1, WMM_SSID1 =0,WMM_SSID2 =1,WMM_SSID3 =0
> wl wmm show
Enable WMM: SSID0 =1, SSID1 =0,SSID2 =1,SSID3 =0
APSD=0
QueIdx=0: APAifsn=3,APCwmin=4,APCwmax=6, APTxop=0,APACM=0
QueIdx=1: APAifsn=7,APCwmin=4,APCwmax=10, APTxop=0,APACM=0
QueIdx=2: APAifsn=1,APCwmin=3,APCwmax=4, APTxop=94,APACM=0
QueIdx=3: APAifsn=1,APCwmin=2,APCwmax=3, APTxop=47,APACM=0
QueIdx=0: BSSAifsn=3,BSSCwmin=4,BSSCwmax=10, BSSTxop=0,BSSACM=0
QueIdx=1: BSSAifsn=7,BSSCwmin=4,BSSCwmax=10, BSSTxop=0,BSSACM=0
QueIdx=2: BSSAifsn=2,BSSCwmin=3,BSSCwmax=4, BSSTxop=94,BSSACM=0
QueIdx=3: BSSAifsn=2,BSSCwmin=2,BSSCwmax=3, BSSTxop=47,BSSACM=0
AckPolicy[0]=0: AckPolicy[1]=0,AckPolicy[2]=0,AckPolicy[3]=0
Telnet Command:
Telnet Command:
This command allows you to configure wireless settings.
wl ht bw value
wl ht gi value
wl ht badecline value
wl ht autoba value
wl ht rdg value
wl ht msdu value
wl ht txpower value
wl ht antenna value
wl ht greenfield value
Syntax Description
Syntax Description
Parameter
wl ht bw value
wl ht gi value
wl ht badecline value
wl ht autoba value
wl ht rdg value
wl ht msdu value
wl ht txpower value
wl ht antenna value
wl ht greenfield value
634
wl ht
wl ht
Description
The value you can type is 0 (for BW_20) and 1 (for BW_40).
The value you can type is 0 (for GI_800) and 1 (for GI_4001)
The value you can type is 0 (for disabling) and 1 (for enabling).
The value you can type is 0 (for disabling) and 1 (for enabling).
The value you can type is 0 (for disabling) and 1 (for enabling).
The value you can type is 0 (for disabling) and 1 (for enabling).
The value you can type ranges from 1 – 6 (level).
The value you can type ranges from 0-3.
0: 2T3R
1: 2T2R
2: 1T2R
3: 1T1R
The value you can type is 0 (for mixed mode) and 1 (for green
field).
Vigor2762 Series User's Guide