Draytek Vigor2762 series User Manual page 524

-h
-p
-t
-w
-x
Example
Example
> log -w
25:36:25.580 ---->DHCP (WAN-5) Len = 548XID = 0x7880fdd4
25:36:33.580 ---->DHCP (WAN-5) Len = 548XID = 0x7880fdd4
25:36:41.580 ---->DHCP (WAN-5) Len = 548XID = 0x7880fdd4
25:36:49.580 ---->DHCP (WAN-5) Len = 548XID = 0x7880fdd4
25:36:57.580 ---->DHCP (WAN-5) Len = 548XID = 0x7880fdd4
--- MORE ---
Page] ---
Telnet Command: ldap user
Telnet Command: ldap user
This command is used to configure the LDAP profile.
Syntax
Syntax
ldap user [INDEX][OPTION]
Syntax Description
Syntax Description
Parameter
INDEX
OPTION
-n VALUE
-b VALUE
514
f: flush the IP filter log
w: flush the WAN log
It means to show this usage help.
It means to show PPP/MP log.
It means to show all logs saved in the log buffer.
It means to show WAN log.
It means to show packet body hex dump.
Client IP = 0.0.0.0
Your IP = 0.0.0.0
Next server IP = 0.0.0.0
Relay agent IP = 0.0.0.0
Client IP = 0.0.0.0
Your IP = 0.0.0.0
Next server IP = 0.0.0.0
Relay agent IP = 0.0.0.0
Client IP = 0.0.0.0
Your IP = 0.0.0.0
Next server IP = 0.0.0.0
Relay agent IP = 0.0.0.0
Client IP = 0.0.0.0
Your IP = 0.0.0.0
Next server IP = 0.0.0.0
Relay agent IP = 0.0.0.0
Client IP = 0.0.0.0
Your IP = 0.0.0.0
['q': Quit, 'Enter': New Lines, 'Space Bar': Next
Description
Specify the index number (1 to 8) of the LDAP profile.
Setup Profile Name.
Setup Base Distinguished Name.
Vigor2762 Series User's Guide