Draytek Vigor2762 series User Manual page 566

Telnet Command:
Telnet Command:
This command displays statistics for WAN interface.
Syntax Syntax
show statistic
show statistic reset [interface]
Syntax Description Syntax Description
Parameter
reset
interface
Example
Example
> show statistic
WAN1 total TX: 0 Bytes ,RX: 0 Bytes
WAN2 total TX: 0 Bytes ,RX: 0 Bytes
WAN3 total TX: 0 Bytes ,RX: 0 Bytes
WAN4 total TX: 0 Bytes ,RX: 0 Bytes
WAN5 total TX: 0 Bytes ,RX: 0 Bytes
WAN6 total TX: 0 Bytes ,RX: 0 Bytes
WAN7 total TX: 0 Bytes ,RX: 0 Bytes
> show statistic reset wan1
Reset WAN1 tx/rx Bytes to zero
>
556
show statistic
show statistic
Description
It means to reset the transmitted/received bytes to Zero.
It means to specify WAN1 ~WAN5 interface for displaying related
statistics.
Vigor2762 Series User's Guide