Draytek Vigor2762 series User Manual page 526

PWD <VALUE>
Example
Example
>ldap set enable 1
>ldap enabled.
> ldap set ssl 1
LDAP with SSL has been enabled!
> ldap set IP 192.168.100.155
LDAP Server IP has been setting.
> ldap set port 389
LDAP Server Port has been setting.
> ldap set dn dc=example,dc=com
LDAP Regular DN has been setting.
> ldap set PWD 123456
LDAP Regular Password has been setting.
Telnet Command: ldap view
Telnet Command: ldap view
This command is used to check current status of LDAP settings configuration.
Syntax
Syntax
ldap view
Example
Example
> ldap view ?
LDAP Enable:Disabled.
LDAP Bind Type:Simple
LDAP with SSL:Disabled
LDAP Regular DN:
LDAP Regular Password:
LDAP Server IP:
LDAP Server Port:389
Telnet Command:
Telnet Command:
This command allows you to configure detailed settings for RADIUS server
Syntax
Syntax
radius enable [0/1]
radius authport [port number]
radius client [add] [idx] -i [address] -m [mask] -p [prefix] -l [length] -s [secret]
radius client [del] [idx]
radius show
radius set_dot1x_phase1 -e [method_idx]
radius set_dot1x_phase1 -d [method_idx]
radius set_dot1x_phase2 -e [method_idx]
516
Set Regular password value.
radius
radius
Vigor2762 Series User's Guide