Draytek Vigor2762 series User Manual page 471

-p
-t
-m
Example
Example
> csm appe config -v 1 -m
Group
vance Enable
Advance abbreviation: Message, File Transfer, Game, Conference, and Other
Advance abbreviation: : M, F, G, C, and O
-------------------------------------------------------------------
OTHERS
OTHERS
OTHERS
OTHERS
OTHERS
OTHERS
OTHERS
OTHERS
OTHERS
OTHERS
.
.
.
------------------------------------------------------------------
Total 66 APPs
>
Telnet Command:
Telnet Command:
It is used to configure APPE signature download interface.
Syntax
Syntax
csm appe interface [AUTO/WAN#]
Syntax Description
Syntax Description
Parameter
Parameter
AUTO
WAN
Example
Example
> csm appe interface wan1
Download interface is set as "WAN1" now.
> csm appe interface auto
Download interface is set as "auto-selected" now.
Telnet Command:
Telnet Command:
It is used to set notification e-mail for APPE signature based on the settings configured in
System Maintenance>>SysLog/Mail Alert Setup (in which, the box of APPE Signature is
checkd under Enable E-Mail Alert).
Syntax
Syntax
csm appe email [-e|-d|-s]
Syntax Description
Syntax Description
Vigor2762 Series User's Guide
View the configuration status of P2P group.
View the configuration status of protocol group.
View the configuration status of Others group.
Type Index
TUNNEL 75
TUNNEL 76
TUNNEL 77
TUNNEL 78
TUNNEL 79
TUNNEL 80
TUNNEL 81
TUNNEL 82
TUNNEL 83
TUNNEL 84
csm appe interface
csm appe interface
Description
Description
Vigor router specifies WAN interface automatically.
Specify the WAN interface for signature downloading.
csm appe email
csm appe email
Name
DNSCrypt
DynaPass
FreeU
HTTP Proxy
HTTP Tunnel
Hamachi
Hotspot Shield
MS Teredo
PGPNet
Ping Tunnel
Enable A
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
461