Draytek Vigor2762 series User Manual page 598

-z <month> <th weekday>
<day in week> <hour>
Example
Example
> sys daylightsave -y 9 1 0 14
% Start: Yearly on Sep 1th Sun 14:00
Telnet Command:
Telnet Command:
This command is used to configure TTL settings which will be displayed in DNS Cache table.
Syntax
Syntax
sys dnsCacheTbl [<command><parameter>|...]
Syntax Description
Syntax Description
Parameter
[<command><parameter>|
...]
-l
-s
-v
-t < 0/n >
-c
Example
Example
> sys dnsCacheTbl -l
%DNS Cache Table List
> sys dnsCacheTbl -t 65
% Set TTL limit: 65 seconds.
% When TTL larger than 65s , delete the DNS entry in the router's DNS
cache tabl
e.
>
Telnet Command:
Telnet Command:
This command is used to configure
Syntax
Syntax
588
month - 1 ~ 12
th weekday – 1 ~ 5, 9: last week
day in week - 0:Sun, 1:Mon, 2:Tue, 3:Wed, 4:Thu, 5: Fri, 6:Sat
hour – 0 ~ 23
e.g, sys daylightsave -y 9 1 0 14
Set the detailed settings of the ending day for yearly type.
month - 1 ~ 12
th weekday – 1 ~ 5, 9: last week
day in week - 0:Sun, 1:Mon, 2:Tue, 3:Wed, 4:Thu, 5: Fri, 6:Sat
hour – 0 ~ 23
e.g, sys daylightsave -z 3 1 6 14
sys dnsCacheTbl
sys dnsCacheTbl
Description
The available commands with parameters are listed below.
[...] means that you can type in several commands in one line.
Display DNS IPv4 entry in the DNS cache table.
Display DNS IPv6 entry in the DNS cache table.
Display the TTL limit value in the DNS cache table.
Set the TTL limit value in the DNS cache table.
0- No limit
N – Greater than or equal to 5.
Clear the DNS cache table.
sys syslog
sys syslog
Vigor2762 Series User's Guide