Draytek Vigor2762 series User Manual page 594

save
Inform [event code]
port [port num]
cert_auth [on/off]
Example
Example
> sys tr069 get Int. nextlevel
Total number of parameter is 24
Total content length of parameter is 915
InternetGatewayDevice.LANDeviceNumberOfEntries
InternetGatewayDevice.WANDeviceNumberOfEntries
InternetGatewayDevice.DeviceInfo.
InternetGatewayDevice.ManagementServer.
InternetGatewayDevice.Time.
InternetGatewayDevice.Layer3Forwarding.
InternetGatewayDevice.LANDevice.
InternetGatewayDevice.WANDevice.
InternetGatewayDevice.Services.
InternetGatewayDevice.X_00507F_InternetAcc.
InternetGatewayDevice.X_00507F_LAN.
InternetGatewayDevice.X_00507F_NAT.
InternetGatewayDevice.X_00507F_Firewall.
InternetGatewayDevice.X_00507F_Bandwidth.
InternetGatewayDevice.X_00507F_Applications.
InternetGatewayDevice.X_00507F_VPN.
InternetGatewayDevice.X_00507F_VoIP.
InternetGatewayDevice.X_00507F_WirelessLAN.
InternetGatewayDevice.X_00507F_System.
InternetGatewayDevice.X_00507F_Status.
InternetGatewayDevice.X_00507F_Diagnostics.
--- MORE ---
Page] ---
Telnet Command:
Telnet Command:
This command can turn on/off SIP ALG (Application Layer Gateway) for traversal.
sys sip_alg [1]
584
It means to save the parameters to the flash memory of the
router.
It means to inform parameters for tr069 with different event
codes.
[event code] includes:
0-"0 BOOTSTRAP",
1-"1 BOOT",
2-"2 PERIODIC",
3-"3 SCHEDULED",
4-"4 VALUE CHANGE",
5-"5 KICKED",
6-"6 CONNECTION REQUEST",
7-"7 TRANSFER COMPLETE",
8-"8 DIAGNOSTICS COMPLETE",
9-"M Reboot"
It means to change tr069 listen port number.
on: turn on certificate-based authentication.
off: turn off certificate-based authentication.
['q': Quit, 'Enter': New Lines, 'Space Bar': Next
sys sip_alg
sys sip_alg
Vigor2762 Series User's Guide