Draytek Vigor2762 series User Manual page 528

port <VALUE>
shared_secret <VALUE>
Example
Example
> tacacsplus set enable 1
TACACS+ enabled!
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
> tacacsplus set IP 192.168.1.59
TACACS+ Server IP has been setting.
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
> tacacsplus view
TACACS+ Enable:Enable.
TACACS+ Server IP:192.168.1.59
TACACS+ Server Port:49
TACACS+ Type:ASCII
TACACS+ Shared Secret:
Telnet Command: tacacsplus view
Telnet Command: tacacsplus view
This command allows users to check the general settings for TACACS+ server
Syntax Syntax
tacacspluse view
Example
Example
> tacacsplus view
TACACS+ Enable:Enable.
TACACS+ Server IP:192.168.1.59
TACACS+ Server Port:49
TACACS+ Type:ASCII
TACACS+ Shared Secret:
Telnet Command:
Telnet Command:
This command allows users to set FTP port for management.
mngt ftpport [FTP port]
Syntax Description
Syntax Description
Parameter
FTP port
Example Example
> mngt ftpport 21
% Set FTP server port to 21 done.
Telnet Command:
Telnet Command:
This command allows users to set HTTP port for management.
518
Set the port number of TACACS+ server.
Set the Shared Secret value of TACACS+ Server.
mngt ftpport
mngt ftpport
Description
It means to type the number for FTP port. The default setting is
21.
mngt httpport
mngt httpport
Vigor2762 Series User's Guide