Ii-5-7 Wake On Lan - Draytek Vigor2762 series User Manual

II-5-7 Wake on LAN

II-5-7 Wake on LAN
A PC client on LAN can be woken up by the router it connects. When a user wants to wake
up a specified PC through the router, he/she must type correct MAC address of the specified
PC on this web page of Wake on LAN (WOL) of this router.
In addition, such PC must have installed a network card supporting WOL function. By the
way, WOL function must be set as "Enable" on the BIOS setting.
Available settings are explained as follows:
Item
Wake by
IP Address
MAC Address
Wake Up
154
Description
If you choose to be woken by MAC Address, you have to
type the correct MAC address of the host in MAC Address
boxes.
The IP addresses that have been configured in
Firewall>>Bind IP to MAC will be shown in this drop down
list. Choose the IP address from the drop down list that
you want to wake up.
Type any one of the MAC address of the bound PCs.
Click this button to wake up the selected IP. See the
following figure. The result will be shown on the box.
Vigor2762 Series User's Guide