Application Notes; How To Build A Lan-To-Lan Vpn Between Vigor Routers Via Ipsec Main Mode - Draytek Vigor2762 series User Manual

Application Notes

Application Notes
A-1 How to Build a LAN-to-LAN VPN Between Vigor Routers via IPsec Main
A-1 How to Build a LAN-to-LAN VPN Between Vigor Routers via IPsec Main
Mode
Mode
This document introduces how to set up Main mode IPsec Tunnel between a Vigor 2862 VPN
server and Vigor 2762 VPN Client. IPsec VPN with Main mode use the IP address of VPN client
as identifier, and the IP address must be set on VPN server; therefore, if the VPN client
doesn't have a static IP, please use Aggressive mode instead.
VPN Server (Dial-In Site – Vigor 2862) Setup
VPN Server (Dial-In Site – Vigor 2862) Setup
1. Create a Dial-In profile for VPN user, go to VPN and Remote Access >> LAN to LAN,
click on an available index to add a new profile.
2. Set up the dial-in profile.
In Common Settings,
(a)
Vigor2762 Series User's Guide
Enter the Profile Name.
211