Draytek Vigor2762 series User Manual page 597

0:00:02
0:00:02
0:00:02
0:00:02
FirmwareRequest(1)
0:00:02
0:00:02
0:00:03
0:00:05
firmwareReady(3)
0:00:05
0:00:05
0:00:05
nToneSet=43, nCamState
=2
0:00:05
0:00:05
0:00:05
Telnet Command:
Telnet Command:
This command is used to configure daylight save setting.
Syntax
Syntax
sys daylightsave [-<command> <parameter> | ... ]
Syntax Description
Syntax Description
Parameter
[<command><parameter>|
...]
-v
-r
-e [1/0]
-t [0/1/2]
-s <year> <month> <day>
<hour>
-d <year> <month> <day>
<hour>
-y <month> <th weekday>
<day in week> <hour>
Vigor2762 Series User's Guide
[DSL] Status has changed: Starting(1) -> Running(2)
[DSL] Status was switched: firmwareReady(3) to Init(5)
[DSL] Status was switched: Init(5) to Restart(10)
[DSL] Status was switched: Restart(10) to
[DSL] Line state has changed: 00000000 -> 000000FF
[DSL] Entering VDSL2 mode
[DSL] modem code: [05-04-08-00-00-06]
[DSL] Status was switched: FirmwareRequest(1) to
[DSL] Status was switched: firmwareReady(3) to Init(5)
[DSL] >> nXtseA=0d, nXtseB=00, nXtseV=07, nFwFeatures=5
[DSL] >> nHsToneGroupMode=0, nHsToneGroup=106,
[DSL] Line state has changed: 000000FF -> 00000100
[DSL] Line state has changed: 00000100 -> 00000200
[DSL] Status was switched: Init(5) to Train(6)
sys daylightsave
sys daylightsave
Description
The available commands with parameters are listed below.
[...] means that you can type in several commands in one line.
Display the daylight saving settings.
Set to factory default setting.
Enable (1) / disable (0) daylight saving.
Specify the saving type for daylight setting.
0 – Default
1 – Time range
2 - Yearly
Set the detailed settings of the starting day for time range type.
year – must be the year after 2013.
month - 1 ~ 12
day – 1 ~ 31
hour – 0 ~ 23
e.g., sys daylightsave -s 2014 3 10 12
Set the detailed settings of the ending day for time range type.
year – After 2013.
month - 1 ~ 12
day – 1 ~ 31
hour – 0 ~ 23
e.g., sys daylightsave -d 2014 9 10 12
Set the detailed settings of the starting day for yearly type.
587