Draytek Vigor2762 series User Manual page 103

PPPoE/PPPoA Client or
MPoA
After finished the above settings, click OK to save the settings and return to previous page.
Advanced
Advanced
Such configuration is applied to upstream packets. Such information will be provided by ISP.
Please contact with your ISP for detailed information.
Vigor2762 Series User's Guide
With the IP address(es) pinging, Vigor router can check if
the WAN connection is on or off.

TTL (Time to Live) – Set TTL value of PING operation.

Ping Interval – Type the interval for the system to
execute the PING operation.

Ping Retry – Type the number of times that the system is
allowed to execute the PING operation before WAN
disconnection is judged.
Choose PPPoE/PPPoA or MPoA as the protocol in General
Settings for such channel.

If PPPoE/PPPoA Client is selected, you have to configure
the settings listed under ISP Access Setup. Enter your
allocated username, password and authentication
parameters according to the information provided by
your ISP.
ISP Name – Type in the name of your ISP.
Username – Type in the username provided by ISP in this
field. The maximum length of the name you can set is 80
characters.
Password – Type in the password provided by ISP in this
field. The maximum length of the password you can set
is 48 characters.
PPP Authentication – Select PAP only or PAP or CHAP
for PPP.

Always On – Check it to keep the network
connection always.

Idle Timeout – Set the timeout for breaking down
the Internet after passing through the time without
any action.
Fixed IP – Click Yes to use this function and type in a
fixed IP address in the box of Fixed IP Address.

If MPoA is selected, you have to configure the settings
listed under MPoA.
Obtain an IP address automatically – Click this button
to obtain the IP address automatically.

Router Name – Type in the router name provided
by ISP.

Domain Name – Type in the domain name that you
have assigned.
Specify an IP address – Click this radio button to specify
some data.

IP Address – Type in the private IP address.

Subnet Mask – Type in the subnet mask.

Gateway IP Address – Type in gateway IP address.
DNS Server IP Address - Type in the primary IP address
for the router if you want to use Static IP mode. If
necessary, type in secondary IP address for necessity in
the future.
93