Draytek Vigor2762 series User Manual page 509

Telnet Command:
Telnet Command:
This command allows you to add a proxy neighbour.
Syntax Syntax
ip6 pneigh -s inet6_addr [LAN1|LAN2|...|LAN4|WAN1|WAN2|USB1|USB2]
ip6 pneigh -d inet6_addr [LAN1|LAN2|...|LAN4|WAN1|WAN2|USB1|USB2]
ip6 pneigh -a [inet6_addr] [-N LAN1|LAN2|...|LAN4|WAN1|WAN2|USB1|USB2]
Syntax Description
Syntax Description
Parameter
-s
-d
-a
inet6_addr
LAN1|LAN2|...|LAN4|
WAN1|WAN2|USB1|USB2
Example
Example
> ip6 neigh -s FE80::250:7FFF:FE12:300 LAN
%
Telnet Command:
Telnet Command:
This command allows you to
Syntax Syntax
ip6 route -s [prefix] [prefix-length] [gateway] [LAN|WAN1|WAN2|iface#> [-D]
ip6 route -s [prefix] [prefix-length] [gateway] [LAN1|LAN2|...|LAN4|WAN1|WAN2|
USB1|USB2|VPN1|...|VPN32] [-D]
ip6 route -d [prefix] [prefix-length]
ip6 route -a LAN1|LAN2|...|LAN4|WAN1|WAN2|USB1|USB2|VPN1|...|VPN32]
Syntax Description
Syntax Description
Parameter
-s
-d
-a
-D
prefix
prefix-length
gateway
LAN1|LAN2|...|LAN4|WAN1|
WAN2|USB1|USB2|VPN1|...|
VPN32]
Vigor2762 Series User's Guide
ip6 pneigh
ip6 pneigh
Description
It means to add a proxy neighbour.
It means to delete a proxy neighbour.
It means to show proxy neighbour status.
Type an IPv6 address
Specify an interface for the proxy neighbor.
Neighbour FE80::250:7FFF:FE12:300 successfully added!
ip6 route
ip6 route
Description
It means to add a route.
It means to delete a route.
It means to show the route status.
It means that such route will be treated as the default route.
It means to type the prefix number of IPv6 address.
It means to type a fixed value as the length of the prefix.
It means the gateway of the router.
It means to specify LAN or WAN interface for such address.
499